Water Pressure Issues

 

Common Causes of Low Water Pressure in Homes

Low water pressure in your home can be caused by a number of factors. 

The most common causes of low water pressure are.

• Leaks in pipes. Even a small leak can significantly affect the water pressure in your home. Leaks can occur as a result of corrosion of old pipes, damage due to external influences, or wear and tear on the piping system. If a leak is not detected in time, it can not only cause a drop in pressure, but also costly damage to your home.
• Clogs in pipes and plumbing systems. Over time, lime scale, rust, debris and other deposits can build up in your pipes. These clogs restrict the flow of water, resulting in low pressure. Clogs are often found in areas where water stands for long periods of time or where pipes have bends and curves. 
• Pump problems. If your home uses a pump to increase water pressure, its malfunction or improper setting can cause insufficient pressure.
• Water heater malfunctions. Scale buildup in the heat exchanger, or internal components of the unit, may restrict the normal flow of water.
• Problems with the main water line. If water pressure is low throughout the home, a possible cause could be a fault in the main water line - leaks or damage.
• Problems with the distribution of water throughout the home. An improperly designed plumbing system, misaligned pipes, or worn pipes can cause restrictions on the normal distribution of water to different parts of the home.

If you notice a decrease in water pressure in your home, contact the professionals at BeeZee Plumbing. We will perform a thorough diagnosis and find the exact cause to restore normal water flow to your home.

Contact Us

Have questions or need assistance? The team at BeeZee Plumbing is here to help! Whether it’s a service inquiry, an urgent repair, or general advice, we’re just a call or email away.

Name *

Looks good!

Please enter your first name.

Phone Number *

Looks good!

Please enter your last name.

Email

Looks good!

Please provide a valid email address.

Select Services Residential Plumbing Commercial Plumbing Emergency Plumbing Water Quality Solutions Other

Looks good!

Please select a department.

Address, City, Zip Code

Looks good!

Please provide a valid email address.

Message *

Looks good!

Please enter your messsage.

I would like to receive information from BeeZee Plumbing on exclusive offers that may be of interest to me. BeeZee Plumbing records certain usage data for security, support, and reporting purposes.

* These fields are required.

 

Troubleshooting Low Water Pressure: From Showers to Hot Water Systems

When your home's water pressure drops, proper diagnostics must be performed to determine the source of the problem. At BeeZee Plumbing, we offer professional low water pressure diagnostic services, allowing us to pinpoint the exact cause of the problem and fix it promptly. During the diagnostic process, we focus on all aspects of the water supply, including showers, hot water system, and general problems in the home.

1. Check water pressure at different points. Helps determine if the problem is localized (e.g., only in the shower) or if it affects all parts of the house.

• If the low pressure is only in the shower or at one faucet, it may indicate a clog at a specific point (such as the shower head or faucet filter).
• If the problem affects the entire house, it is likely related to the overall water system, and you should look for the source in the pipes, water heater, or main water line.

2. Inspection of pipes and possible clogs. We use special cameras to inspect pipes for diagnosis, allowing us to see clogs or damage without having to tear up walls or floors.
3. Checking the water heaters - the condition of the boiler or water heating system. The main causes of decreased hot water pressure include:

• mineral deposits in the boiler heat exchanger;
• thermostat maladjustment or pump failure; 
• overheating of the water (affects its flow and pressure).

4. Check water pressure in the main line (from the water meter to the house). The connection to the external water supply is inspected, possible leaks and damages are identified.
5. We check pumps and pressure regulation. We check pumps for possible breakdowns or faulty settings. 
6. Checking the water distribution system. All connections and pipes are checked for wear or damage that could restrict water flow.

BeeZee Plumbing uses state-of-the-art diagnostic techniques and specialized equipment to pinpoint the exact cause of low water pressure in your home and provide a solution that will restore your water system to normal operation.

 

Why Choose Professional Services for Water Pressure Repairs?

When it comes to water pressure problems, skilled action by professionals is the key to an effective and long-lasting solution to the problem. The team at BeeZee Plumbing provides professional water pressure troubleshooting services in Chicago and the suburbs. Turning to professionals, is due to a number of undeniable advantages. 

These are

• Quick diagnosis – we will promptly identify the source of the pressure problem and offer an effective solution.
• Quality workmanship – we use only high-quality materials and equipment to restore normal water supply.
• Guarantee on works – we provide a guarantee on all performed works, ensuring durability and reliability of your piping systems.
• Affordable prices – we offer honest and transparent prices with no hidden costs.

Contacting professionals for water pressure repair is a guarantee that your system will work efficiently and safely for a long time.

Restore Your Water Pressure Today – Contact Us!

If you're experiencing a low water pressure problem, don't put it off. Contact BeeZee Plumbing and our experienced technicians will quickly identify and eliminate the cause and restore comfortable water service to your home. We guarantee quality diagnostics, effective repairs, and long-lasting results. Don't wait for the problem to get worse - call us today (Phone: 847-816-9515) and enjoy stable water pressure!